How Does Linear Supervisor Work for PERS [Article]
Q: How does Linear's supervision work for the PERS products - what reports will come in to the Central Station if subscribers leave home with their pendant transmitters for extended
- PERS and older customers [Article]
Q: Our PERS subscribers are typically 70-80 years old, and they don't always remember to test the products as we recommend for them to. What options are available to make sure
- How do I perform a Node Swap in Emerge? [Article]
How to perform a Node Swap in Emerge Once a Network Controller Combo board or node has been replaced and is powered
- How do I program a PERS console? [Article]
1. Perform the steps detailed in the RA-2400/PERS-2400 reference guide to setup the RA-2400 program.
- How do I delete a transmitter in a PERS console? [Article]
Caution; all transmitters will be erased. Below are the steps: 1. Press and hold the test button for 5 seconds. 2. Press the clear button to return
- I have a clicking noise when I try to listen. [Article]
If you are using a 4-wire Intercom System, there may be a short in the wiring or in one or more of the stations. The primary trouble shooting steps involve a proced
- My vacuum doesn't have as much suction as it use to. What's wrong? [Article]
Most central vacuum systems have two filters that protect the motor from dirt and debris – the main cloth bag or sponge filter, and a smaller screen filter.
- How do I set up LDAP or Active Directory server in eMerge? [Article]
Setting Up LDAP or Active Directory Server Select Setup: Network Resources:
- How do I diagnose the security application in eMerge? [Article]
System Maintenance Utilities Select Setup : System Maintenance : Utilities.
- How do I change portal definitions in eMerge? [Article]
Changing Portal Definitions Select Setup : Access Control : Portals.
- How do I schedule an auto log import in the hubmanager pro software? [Article]
The Tools drop-down menu contains the following items:
1. Log Arch
- How do I add/change or delete a user? [Article]
- What is the radio range of my devices? [Article]
Advertised radio range is determined by field tests on a test range. These tests are line-of-sight, with no obstructions. The range must meet Fed
- Why isn't the door opening at the scheduled time spec? [Article]
If your door(s) are not opening at the scheduled time there are several things to check: Is the node(s) the portal group is on connected and otherwise running normally?
If the node
- How do I check my power supply to see if it is putting out the right voltage? [Article]
You will need a voltage meter in order to check your power supply/transformer.
Following are some of the more common power supplies and their expected
- How do I "Setup Supervision" in my PERS Consoles? [Article]
If the two hour status timer is required for supervision, permanently enable the timer by pressing the transmitter button five times in succession within four seconds. When the DXS-62A is in
- How do I program a transmitter into a security panel? [Article]
1.Use your Master Code, then hit "Test" button once to go into the Test mode.
2. Use your Master Code and "Test" button again to get
- How do I setup a NAS backup? [Article]
The network controller performs daily backups at 00:15 hours. These backups are written to the network controller board and automatically written to network storage if
- How do I setup an FTP Backup? [Article]
To setup the network storage location:
Network Administrator tasks:
1.On the FTP Server crea
- How do I setup communications between my PC and a HubPlus? [Article]
Scenario 1-The PC is less than 6' from the Panel and using the included PC Software Assembly Kit (P/N 2085010)