How do I setup System Manager in HubManager Pro? [Article]
System Manager is a feature of HubManager Pro versions 6 and above an
- AP-5 - Clear Toggled Relay [Article]
Transmitters for the AP-5 receiver can be programmed in either timed (momentary) or Toggle (ON/OFF) mode. Timed mode: The remote button is pressed and the
- How do I adjust the force setting on my Linear garage door operator? [Article]
In the upper right hand corner of the left hand side of the operator, you will see a rectangular cutout. In this area you will find two small adjustment screws labeled "OPEN FO
- I want to delete a user, but I don't know the user number [Article]
If you need to delete a specific user but do not know the user number they are assigned then you will need to go into your Hub Manager application. The Import Door Set
- How do I increase the range on my radio receiver? [Article]
Sources of Interference:
In many cases, if you are having a problem with outside radio interference (RFI) that seems
- How do I set the travel limits on my LDCO800? [Article]
Adjusting the Open Limit
Use the wall station or a remote control to move the door to the open limit position. On the back of the opener, press both the "UP" and "L
- The remotes will not open my garage door operator from inside or outside the ga... [Article]
Press the button on the transmitter from inside the garage and observe the courtesy light on the front of the operator. If the light blinks 5 times, you probably have the "Vacation Mo
- How do I increase the force setting on my LDCO800 operator? [Article]
...e LDCO800 computes the force required to open and close the door every cycle, and automatically adju...
- I received a 'Device is not connected or unexpected device type' error... [Article]
Take the following steps to resolve this issue:
1. Go to the communication menu and choose network query
- Why will the remote open my Linear garage door operator, but not close it? [Article]
... you have to hold down on the wall push button to close your door, you are definitely having a probl...
- How do I adjust the force setting on my Challenger garage door operator? [Article]
On both sides of the mounting plate of the motor unit, you will find an adjusting nut. The close force adjusting nut is on the left side and is marked "CLOSE FORCE." The open force adjusting
- How do I adjust the force setting on my Allister/Allstar/MVP garage door operato... [Article]
On both sides of the mounting plate of the motor unit, you will find a large adjusting screw. The close force adjusting screw is on the left side and is marked "CLOSE." The open force adjusting s
- How do I set the travel limits on my Linear garage door operator? [Article]
Travel limits are set on the LDO/LSO/LCO series operators by adjusting the limit adjusting screws accessed through the holes on the left hand side of the operator. These are marked "CLOSE LIMIT"
- Program an Auto Open Time Zone in AccessBase2000 [Article]
1. Click on the Setup button (it looks like a hammer & screwdriver).
2. Click Global network settings.
- My PC crashed and I need to find out my settings. [Article]
The Import Door Settings feature imports and displays the complete user data and door settings of any physically connected (com port, modem, or TCP/IP) door controller to the Hub Ma
- How do I retrieve my list of users and controller settings? [Article]
The Import Door Settings under the Communications Menu in HubManager Pro imports the complete user list and do
- How do I configure my SEG-1 or my SEG-M to use a static IP address or to configu... [Article]
Requirements:
SEG-M or S
- Does Linear Offer Wander Management [Article]
Q: Does Linear offer any product solutions for "Wander Management"? A: PIR Motion detectors and door-window sensors can be deployed in households to sound local alarm
- Fall Detectors and customers unabel to push button [Article]
Q; Some competitive PERS products offer fall detectors, or other approaches that allow for emergency communications, even if the subscriber can't press their button.
- PERS to Far Away [Article]
Q: What happens if our PERS subscriber presses their transmitter button, but is too far away from the console to have a 2 way voice sessions wiht the Central Monitoring Station?