Linear Products Knowledge Base

The AE-500 display a welcome message alternating with instructions on how to call a resident. The welcome message can be customized to suit the installation.

Note: When changing the welcome display, programming the AE-500 from a computer is the preferred method, however, it can be accomplished using the panel’s keypad by following the steps listed below.

Note: This article assumes you are familiar with entering the local programming mode and navigating within the programming environment

1. Enter the Programming Mode.

2. Enter 5 7 #.

3. Enter the new text for the top line of the display (up to 16 characters).

4. Press #.

5. Enter the new text for the bottom line of the display (up to 16 characters).

6. Press #.

7. Exit Programming Mode if all programming is complete.