Linear Products Knowledge Base

1.  With the panel disarmed, press the UP or DOWN button until the desired receiver channel number (1-64) is displayed - Memory light will be off if the receiver channel is vacant (only a vacant channel will accept a transmitter
2.  Press the ADVANCE button to select the output zone (channel) number (1-8) for the displayed receiver channel number
3.  Press the MEMORY button once (the memory light will blink)
4.  Activate the transmitter
5.  The MEMORY light will go on, showing that the transmitter was entered and the receiver's displayed channel is occupied
6.  Exit programming by pressing the UP and DOWN buttons at the same time