Linear Products Knowledge Base

Category » Current M&S Vaccum Systems

There were 6 articles found in this category:

1. Is there any way to lower the sound of my vacuum?
   The Model VMMUFS Noise-reducing Exhaust Muffler attaches between the central vacuums' exhaust port and the exhaust piping system. The muffler greatly reduces the sound level of the central vacuums' exhaust system. The Model VMMUFS noise-reducing muffler is compatible with all AirVac Central Vac ...
2. What are the dimensions for the hole in the wall for the dust pan?
   Using a hole saw, cut an access hole 1 ½" in diameter. Then cut a 6 ¾" long slot in the base board, tight to one stud.
3. Can you replace the inlet doors?
   The doors are not available for purchase individually. The entire wall inlet must be replaced. Please contact us at vacuum@linearcorp.com if you have further questions.
4. What is the decibel rating for your Vacuums?
   The industry does not have a standard for measuring dB levels. Sound levels depend on the size of the room, the material from which the room is constructed, the distance from a vacuum unit at which the measurement is taken, and the level of generated sound from the motor.
5. What model of vacuum do I need for my house?
   We offer two different types of central vacuums, and each one has four different models. 1. The Red Series, or bagless unit, has a canister that deposits the dirt and debris directly into a bucket which you remove and empty. 2. The Platinum Serries, or bag type, utilizes a disposable bag for ...
6. The bag indicator shows the bag is full, but I checked it and it isn't.
   Our AVR (Red Series) and AVP (Platinum Series) canisters have a bag indicator which is used to "warn" users that it may be time to empty the bag or refuse bucket. Some models have an indicator light that will blink when it is time to empty the bag or bucket. Others will have a gauge which shows ...