View Articles by Category
There are no sub categories
Category » Card Reader
< 233 >
There were 3 articles found in this category:
How can I manually program a card on a ProxPad, LS2P or Max3 panel?
How can I manually program a card on a ProxPad, LS2P or Max3 panel?Terms: User number = the number of the user in the list of users held internally by the controller. Controllers in the 212 and 232 series have the capacity to hold 120 users. Users are "numbered" from 1 to120 in the case of ...- How do I add an Indala card?
If you are using a Motorola Proximity Card reader or a Wiegand Keypad Front End with a Secured Series Hub controller, then you must select the Card Format named Magnetic Stripe. In addition, if you are using Motorola Cards (Indala), you will likely need to place a "7" in front of the card numb ...
- My HID card reader connected to my panel does not work.
Scenario 1 – Max3/MiniMax3 with an HID card reader using HubManager Pro 1. Verify that the jumper on JP2 on the Max3 Door Control Module has been removed. This jumper is located just above the blue, secondary Front End Connector which is located just above the primary Front End Connec ...