HID 5355kp
HID 5355KP: PROGRAMMING CODE + PIN TO WORK TITH THE MAX 3 This is a bit burst keeypad that is not buffered which is required by the Max 3. ADI stocks the 00 format. An HID tech will need to send a free programming card to change the format of the keypad.
- What type of battery backup do I need for my IEI product?
If you need to setup a backup power supply in the event of a power failure you will need to know the total Milliamps the unit is drawing. The total milliamps for the IEI products can be found on the installation documentation packaged with the product. The mathematics to figure out the batter ...
- How do I setup communications between my PC and a HubPlus?
Scenario 1-The PC is less than 6' from the Panel and using the included PC Software Assembly Kit (P/N 2085010) 1. Connect the IE supplied ToComp (P/N E000-0004) Adapter to the Communications Port (Com Port) on your computer. 2. Connect the IEI supplied phone type cable to the ToComp Adap ...
- How do I setup communications between my PC and ProxPadPlus?
Scenario 1-Using the optional IEI USB to Serial Converter on Single Gang Plate (P/N 0295097) 1. Connect the USB cable to any USB port on your computer. 2. Connect the other end of the USB cable to the USB to Serial Converter on Single Gang Plate. 3. Windows will recognize this device and ...
- How do I setup communications between my PC and my Max2/MiniMax2?
Scenario 1 The PC is less than 6' from the Panel and using the included PC Software Assembly Kit (P/N 2085010) 1. Connect the IEI -supplied ToComp (P/N E000-0004) Adapter to the Communications Port (Com Port) on your computer. 2. Connect the IEI-supplied phone type cable to the ToComp adapte ...
- I have added card users in HubManager Pro for my Max3/MiniMax3 but they do not work.
Perform the following troubleshooting steps: 1. Check the wiring from the card reader to the front end connector on the Max3 panel. The proper wiring is: Card Reader ------ Front End Black Black Red ...
- How do I retrieve my list of users and controller settings?
The Import Door Settings under the Communications Menu in HubManager Pro imports the complete user list and door settings of any physically connected (COM Port, USB, modem, or TCP/IP) door controller. This is useful if you need to retrieve the information stored in a door controller for troubl ...
- How do I setup communications between my Pc and my Max3/MiniMax3?
Scenario 1 Using the optional IEI USB to Serial Converter on Single Gang Plate (P/N 0295097) 1. Connect the USB cable to any USB port on your computer. 2. Connect the other end of the USB cable to the IEI USB to Serial Converter on a Single Gang Plate. 3. Windows will recognize this de ...
- How do I setup communications between my PC and an HC500P?
How do I setup communications between my PC and an HC500P? Scenario 1-Using the PC Software Assembly Kit (P/N 2085010) 1. Connect theToComp (P/N E000-0004) adapter to the Communications Port (Com Port) on your computer. 2. Connect the included phone type cable to the ToComp Adapter. 3. ...
