Home » Categories » M&S Central Vacuum Systems

If I upgrade my power head, the hose, or the wand, can I keep my old equipment?

This really depends on several factors: the type of equipment you have, the model that you are currently using, and what you intend to purchase at this time.

If you have a "standard" power head (air only, non-electrical) then replacing the power head, the hose or the wand should not present any problems. You may find a couple differences between your old and new equipment you purchase, but they should all work together without too much trouble. Before you make a purchase, however, call our Technical Support group at (800) 421-1587 and ask to speak to one of the vacuum technicians. They can go over the different options you have and adivise you of what will and won't work together.

If you have an electrically powered brush, then things are a little more complicated.

First, check the model number of your power head. (For instructions on finding the model number for your power head, please see: http://www.linearcorp.com/faq/article.php?id=223)

If your power head is anything other than a VM458, and you replace the hose, the wand, or the power head, you must replace all three pieces due to the redesign of the electrical connection between them.

If you have any questions regarding your equipment, please contact us at vacuum@linearcorp.com.

Article Rating (No Votes)
Rate this article
  • Icon PDFExport to PDF
 
Attachments Attachments
There are no attachments for this article.
Related Articles
Can I buy wheels for my power brush?
Viewed 1225 times since Tue, Nov 9, 2010
My Vacuum won’t shut off
Viewed 1915 times since Thu, Jul 7, 2011
Can I buy a replacement switch for my hose?
Viewed 1223 times since Tue, Nov 9, 2010
Can I vacuum saw dust?
Viewed 2103 times since Tue, May 25, 2010
How do you remove or install the Teflon bag in my vacuum?
Viewed 1357 times since Wed, Jan 12, 2011
I get suction at my can, but not through inlets.
Viewed 1200 times since Fri, Mar 12, 2010
My vacuum doesn’t have as much suction as it used to. What’s wrong?
Viewed 8746 times since Thu, Jul 7, 2011
Can I buy a belt for my CT14DX or my CT18DX?
Viewed 1466 times since Tue, Mar 9, 2010
My Wall inlet has a constant red LED, but my vacuum canister has a green LED.
Viewed 1240 times since Thu, Jul 7, 2011
How can I find a dealer in my area?
Viewed 1678 times since Mon, Mar 7, 2011