Product Search
   Product Manuals
   Product Literature
   Product List
   Technical Support
AUDIO VIDEO DATA SOLUTIONS
Linear delivers a new level of performance with its Audio Video Distribution Systems
Audio Video Data Solutions

  RF Distribution Amplifiers
  Audio/Video Modulators
  Data, Telephone, Video Distr Modules
  RF Splitters, Filters, Accessories

  Infrared Remote Controls
  Structured Wiring Enclosures
  Structured Wiring Accessories
  Audio/Video Distribution Accessories


RF DISTRIBUTION AMPLIFIERS
DA-500A DA-500A: RF Amplifier
RF amplifier with 18 dB of gain, DTV capable, bandwidth 50 MHz - 1000 MHz forward only
DA-506BID DA-506BID: Bi-Directional RF Distribution Amplifier
Bi-directional RF distribution amplifier with one input for CATV or off-air antenna and six outputs for televisions (4 short, 2 long), bandwidth: 54 MHz - 806 MHz forward; 5 MHz - 42 MHz reverse
DA-520A DA-520A: Bi-directional RF Amplifier
Bi-directional RF amplifier with 20 dB of gain, DTV capable, bandwidth: 54 MHz - 1000 MHz forward; 5 MHz - 40 MHz reverse
DA-550BID DA-550BID: Bi-directional RF Distribution Amplifier with 12-volt IR
Bi-directional RF distribution amplifier with one input for CATV, two inputs for modulators and eight outputs for televisions plus 12-volt IR control, DTV capable, bandwidth: 54 MHz - 1000 MHz forward; 5 MHz - 42 MHz reverse
DA-550HHR DA-550HHR: High-headroom RF Distribution Amplifier with 12-volt IR
High-headroom RF distribution amplifier with one input for CATV or off-air antenna, two inputs for modulators and eight outputs for televisions plus 12-volt IR control, DTV capable, bandwidth: 5 MHz - 1000 MHz forward only
H816BID H816BID: Bi-directional Economical Whole House Video Distribution Amplifier
Distributes CATV or antenna signals to up to six televisions (four short, two long), bandwidth: 54 MHz-806 MHz forward; 5 MHz-42 MHz reverse
H838BID H838BID: Bi-directional Video Hub with 5-volt IR
Amplifies signal to eight television locations, two modulator inputs to add locally generated channels, IR repeating system using 5-volt targets, DTV capable, bandwidth: 54 MHz-1000 MHz forward; 5 MHz-42 MHz reverse
H838HHR H838HHR: High-headroom Video Hub with 5-volt IR
Amplifies signal to eight television locations, two modulator inputs to add locally generated channels, IR repeating system using 5-volt targets, DTV capable, bandwidth: 5 MHz-1000 MHz forward only

back to top

AUDIO / VIDEO MODULATORS
3025 3025: Three-input Video Distribution System with 5-volt IR
Modulates two audio/video sources to two custom TV channels and distributes antenna/CATV signals to five locations with IR control, bandwidth: 40 MHz - 1000 MHz forward only
5415 5415: One-channel Video Modulator
Modulates one video and audio input to one programmable TV channel
5425 5425: Two-channel Video Modulator
Modulates two video and audio inputs to two programmable TV channels
5435 5435: Three-channel Video Modulator
Modulates three video and audio inputs to three programmable TV channels
5445 5445: Four-channel Video Modulator
Modulates four video and audio inputs to four programmable TV channels
5515 5515: One-channel Video Modulator with IR
Modulates one video and audio input to one programmable TV channel, connection for one IR emitter, can remotely power DA & H838 series amplifiers
5525 5525: Two-channel Video Modulator with IR
Modulates two video and audio inputs to two programmable TV channels, connection for two IR emitters, can remotely power DA & H838 series amplifiers
5545 5545: Four-channel Video Modulator with IR
Modulates four video and audio inputs to four programmable TV channels, connection for four IR emitters, can remotely power DA & H838 series amplifiers
DATA, TELEPHONE, AND VIDEO DISTRIBUTION MODULES
DMD-16 DMD-16: Data Distribution Module
Provides 16 un-bridged 110 punch-down termination points aligned with a corresponding RJ-45 connector, Cat-5e compliant
DMT-16 DMT-16: Telephone Distribution Module with Surge Protection
Accepts four incoming telephone lines and distributes them to 16 locations with 110 punch-down connectors, four line surge protection with LED indicator for each individual line, RJ-31X jack, and a master disconnect jumper, RJ-45 jack for expansion
DMT-24 DMT-24: Telephone Distribution Module with Surge Protection
Accepts four incoming telephone lines and distributes them to 24 locations with RJ-45 outputs, four line surge protection with LED indicator for each individual line, RJ-31X jack, and a master disconnect jumper, RJ-45 jack for expansion
H628 H628: Data Termination Hub
Terminates up to eight Cat-5e data lines; eight RJ-45 jacks and eight 110 punch-down connectors
H629 H629: Data/Telecom Termination Hub
Includes eight Cat-5e bridgeable circuits (110 punch-down connectors to RJ-45 jacks), and terminates eight Cat-5 wires, eight additional 110 punch-down connectors for bridging up to four telephone lines
H611 H611: Telephone Master Hub with Surge Protection
Distributes up to four incoming telephone lines to up to four telephone wall plates, with a RJ-31X jack for security system seizure of line one, four line surge protection with LED indicator for each individual line, and a master disconnect jumper, RJ-45 jack and 110 punch-down connector for expansion
H616 H616: Telephone Master Hub
Distributes up to four telephone lines to up to six telephone wall plates, RJ-31X jack for security system seizure of line one, RJ-45 jack for telephone line expansion
H618 H618: Telephone Expansion Hub
Distributes up to four telephone lines to up to eight telephone wall plates, RJ-45 expansion jack for connecting multiple H618s
H619 H619: RJ-45 Telephone Interface Hub
Distributes up to four telephone lines to up to 12 telephone locations via RJ-45 jacks, two RJ-45 expansion jacks for looping multiple H619s, 4-line 110 punch-down
H801 H801: Combination Telephone/TV Hub
Two telephone lines can be distributed to six locations via 110 punch-down connectors, CATV or antenna signals can be routed to four locations with balanced splitter, DTV capable, bandwidth: 5 MHz - 1000 MHz
H802 H802: Combination Telephone/TV Hub
Four telephone lines can be distributed to six locations via 110 punch-down connectors, CATV or antenna signals can be routed to four locations with balanced splitter, DTV capable, bandwidth: 5 MHz -1000 MHz
H804 H804: Splitter/Combiner Hub
Balanced splitter, splits CATV or antenna signals to four locations, or combines four inputs into one output, DTV capable, bandwidth: 5 MHz - 1000 MHz
H806 H806: Splitter TV Hub
Balanced splitter, splits CATV or antenna signals to six locations, DTV capable, bandwidth: 5 MHz - 1000 MHz
H808 H808: Splitter TV Hub
Balanced splitter, splits CATV or antenna signals to eight locations, DTV capable, bandwidth: 5 MHz - 1000 MHz

back to top

RF SPLITTERS, FILTERS, AND ACCESSORIES
2509 2509-10: 9dB Tap (10-pack)
Provides minimal insertion loss through the output (1 dB), while allowing a signal to be tapped from the original source with high loss (9 dB). Can be used in reverse to combine very high signals with low to normal signals. DTV capable.
2512 2512: DC & IR Passing 2-way Splitter/Combiner
2512-25: DC & IR Passing 2-way Splitter/Combiner (25-pack)
Bi-directional 2-way splitter/combiner that can pass DC and IR control signals. DTV capable.
2514 2514: DC & IR Passing 4-way Splitter/Combiner
Bi-directional 4-way splitter/combiner that can pass DC and IR control signals. DTV capable.
2532 2532: 2-way Splitter/Combiner
2532-25: 2-way Splitter/Combiner (25-pack)
Bi-directional 2-way splitter/combiner. DTV capable.
2534 2534: 4-way Splitter/Combiner
Bi-directional 4-way splitter/combiner. DTV capable.
2538 2538: 8-way Splitter/Combiner
Bi-directional 8-way splitter/combiner. DTV capable.
LPF-470 LPF-470: Low-pass Filter
Removes all channels above the 470 MHz pass band, allowing insertion of locally-generated modulated channels, passes off-air TV channels 2-13 and CATV channels 2-64
LPF-600 LPF-600: Low-pass Filter
Removes all channels above the 600 MHz pass band, allowing insertion of locally-generated modulated channels, passes off-air TV channels 2-35 and CATV channels 2-86
LPF-750 LPF-750: Low-pass Filter
Removes all channels above the 750 MHz pass band, allowing insertion of locally-generated modulated channels, passes off-air TV channels 2-60 and CATV channels 2-116
NF-469 NF-469: Notch Filter
Removes CATV channels 64-70 and UHF channels 14-19, allowing insertion of locally-generated modulated channels, passes all other channels
NF-470 NF-470: Notch Filter
Removes CATV channels 70-74 and UHF channels 19-23, allowing insertion of locally-generated modulated channels, passes all other channels
NF-471 NF-471: Notch Filter
Removes CATV channels 75-80 and UHF channels 24-29, allowing insertion of locally-generated modulated channels, passes all other channels
2501-10 2501-10: Blocking Capacitor (10-pack)
Used in systems where DC and/or infrared control pulses are present on the coaxial cable
2503-10 2503-10: 3dB In-line Attenuator (10-pack)
Inserts in coaxial cable feeds to reduce signal amplitude level 3dB
2506-10 2506-10: 6dB In-line Attenuator (10-pack)
Inserts in coaxial cable feeds to reduce signal amplitude level 6dB
2507-10 2507-10: 75-ohm Terminator (10-pack)
Provides a 75-ohm load than can be used on unused splitter output ports to maintain uniform signal levels
TC-200A TC-200A: Tilt Compensator
Provides a balanced signal level by compensating for high frequency cable loss allowing all signal levels on all channels to be of equal amplitude at distant locations
C-BCK C-BCK: Cable Box Combiner Kit
Allows a CATV box to be tuned to all normal CATV channels with modulated channels on custom channel numbers

back to top

INFRARED REMOTE CONTROLS
2010 2010: In-wall Power Injector IR Interface
Remotely powers DA-8200 & DA-550 series amplifers and provides two IR emitter connections
2100A 2100A: 12-volt In-wall IR Interface
Terminates output from DA-550 series amplifiers and provides IR target and emitter connections, 12-volt systems only
2130A 2130A: 12-volt Mini IR Target with Talk Back LED
Set-top IR target that connects to a 2100A In-wall IR Interface, with talk back LED
2171 2171: Single-head IR Emitter
Single-head IR Emitter that connects to video hub, 2100A and 2010 in-wall interfaces, or to a 5500 series modulator
2171-4 2171-4: Single-head IR Emitter (4-pack)
Single-head IR Emitter connects to ENC-SIWP, ENC-LIWP, video hubs, 2100A and 2010 in-wall interfaces, or to a 5500 series modulator, 4-pack
2172 2172: Dual-head IR Emitter
Dual-head IR Emitter that connects to video hub, 2100A and 2010 in-wall interfaces, or to a 5500 series modulator
2181 2181: IR Coupler
Sends IR control signals between multiple DA-550, DA-8200, H838BID, or H838HHR amplifiers
2184 2184: IR Breakout Block
Allows local IR access on DA-550, DA-8200, H838BID, and H838HHR distribution amplifiers, drives up to four IR emitters

back to top

STRUCTURED WIRING ENCLOSURES
H312KIT H312KIT: 12" Plastic Enclosure, Includes Cover
12" plastic enclosure, provides grid mounting space for Linear's structured wiring components, fits into standard stud bays or can be surface mounted using our flexi-mount system (slots and tabs), ABS construction, eight 2" knockouts including one on each side, paint shield, screws and snap-on ABS vented cover included, ETL Listed
H318 H318: 18" Enclosure
Provides grid mounting space for Linear's structured wiring components, fits into standard stud bays or can be surface mounted using our flexi-mount system (slots and tabs), 16-gauge all metal construction, eight 2" knockouts including one on each side
HC18A HC18A: 18" Enclosure Cover
Ventilated enclosure cover secures and protects the structured wiring components mounted inside the H318 enclosure. For additional security, use the optional H208 lock kit.
HD18 HD18: 18" Hinged Door Depth Extension Kit
Removable hinged door that attaches to H318 & H218A enclosure to increase cabinet depth for larger power supplies and improved cooling. For additional security, use the optional H208 lock kit.
H336 H336: 36" Enclosure
Provides grid mounting space for Linear's structured wiring components, fits into standard stud bays or can be surface mounted using our flexi-mount system (slots and tabs), 16-gauge all metal construction, eight 2" knockouts including one on each side
HC36A HC36A: 36" Enclosure Cover
Ventilated enclosure cover secures and protects the structured wiring components mounted inside the H336 enclosure. For additional security, use the optional H208 lock kit.
HD36 HD36: 36" Hinged Door Depth Extension Kit
Removable hinged door that attaches to H336 & H236A enclosure to increase cabinet depth for larger power supplies and improved cooling. For additional security, use the optional H208 lock kit.
H200 H200: Universal Mounting Bracket
The smallest and most economical metal bracket for surface mounting Linear's structured wiring components, mounts over single or double gang openings, can be used as an adapter for Linear modules in other manufacturer's enclosures
H205 H205: Enclosure Cover
Creates a sturdy, all-metal enclosure by attaching to the Model H200 Universal Mounting Bracket

back to top

STRUCTURED WIRING ACCESSORIES
H291 H291: Two Duplex Outlet AC Power Accessory
Fits inside the Model H318 or H336 enclosure to provide a UL Listed location to mount AC outlets (outlets not included)
H270 H270: Wire Spacer
Makes wiring easier by adding 1" of space behind the module mounting grid, for the H318, & H336
H275 H275: Universal Mounting and Wire Management Bracket
Makes wiring easier by adding 1" of space behind the module mounting grid, modules mounts horizontal or vertical, for the H318 & H336
MB-55 MB-55: Universal Full-width Grid Mounting Bracket
Allows medium-size electronics to mount to the H318 and H336 Enclosures
MB-56 MB-56: Universal Half-width Grid Mounting Bracket
Allows small-size electronics to mount to the H318 and H336 Enclosures
H000 H000: Replacement Snap Locks (10-pack)
Used to replace any broken OpenHouse grid mounting snap locks
H001 H001: Universal Grid Mount Kit (12-pack)
Allows non-OpenHouse modules to be fastened to the OpenHouse grid
H208 H208: Lock Kit
Allows locking OpenHouse enclosures with a key to provide additional security, fits HC18A, HC36A, HD18, & HD36
H271 H271: Coupling Tube
Enclosure accessory for connecting two enclosures 2" apart, 2" conduit size
H272 H272: Snap-in Grommets (5-pack)
Provides wire protection from the sharp metal edges of the 2" enclosure knockouts
H281 H281: Adapter
Creates a mounting surface to attach keystone style telephone, data, and coax barrel connectors (connectors not included) to the OpenHouse grid
H282 H282: Isolation Mounting Bracket
Heavy-duty bracket that allows mounting other products onto the OpenHouse mounting grid
H283 H283: Isolation Mounting Bracket
Light-duty bracket that allows mounting other products onto the OpenHouse mounting grid
AUDIO/VIDEO DISTRIBUTION ACCESSORIES
2743 2743: Cable Set
Allows the signals to be looped through without the use of a Y adapter
350-086 350-086: Power Supply 15 VDC @ 300 mA
UL Listed, Class 2 plug-in transformer with 2.1 mm mini-plug on the output cable - 3025, 5415, 5425, 5435, DA-506BID, DA-550 series
350-103 350-103: Power Supply 15 VDC @ 600 mA
UL Listed, Class 2 desktop power supply with 2.1 mm mini-plug on the output cable - SVC-10, SVC-10R, SVS-52
350-101 350-101: Power Supply 15 VDC @ 900 mA
UL Listed, Class 2 plug-in transformer with 2.1 mm mini-plug on the output cable - 5545
226888 226888: Power Supply 12 VDC @ 2.5 Amps
UL Listed, Class 2 desktop switching power supply with 2.1 mm mini-plug on the output cable - DMC-10H

back to top


  Specifications subject to change without notice.