found in the lower left portion of the screen. The
following dialog box will appear:It is recommended that you connect to the network before you start so that AccessBase can determine how many controllers are present and what their memory module configuration is.
1) From the Network Setting
Screen, click on the Connect icon
found in the lower left portion of the screen. The
following dialog box will appear:
2) After AccessBase connects to the network, you will see the a message indicating which node of the network you are connected to and the SD & RD LED's will flash, indicating that AccessBase is sending (SD) & receiving (RD) data from the network.
Copyright © 2000-2006 Linear LLC - All right reserved